Facility
JASCO V – 750 UV Spectrophotometer
DLS - Litesizer™ 500 – BM10 (Anton Paar)
Multichannel Potentiostat (AutoLab: M204)
Biopotential Galvanostat (DropSens)
Inverted Fluorescence Trinocular Microscope CKX 53)
Lateral Flow Assay (BioArtha: Antibody Printer, Cutter and Packaging machine)
Keithley Electrometer 6517B
Gas/ Humidity / Light sensor measurement system
| Facilities for Material Synthesis | ||
|---|---|---|
| 1 | Probe Ultrasonicator (Qsonica: Q700A-220, 50/60Hz) | Merck-Millipore water purification system |
| 2 | Muffle furnace (BTI: RT - 1100 oC) | Fume Hood |
| 3 | Vacuum Oven (BTI: RT - 220 oC) | Weighing Balance (Mettler Toledo ME204/0.1 mg) |
| 4 | Microwave Oven (Whirlpool: MW20SW / 700 W) | Chemical Fume Hood |
| 5 | Hot air oven (BTI: RT - 220 oC) | Ultrasonic Cleaner (Remi - LMVC-6) |
| 6 | Centrifuge Microprocessor (Remi PR-24 Max rpm 15000) | Homogenizer (Remi - RQT 127A/D) |
| 7 | Dehydrator (Max Temp -90 °C) | Multi-Position Stirrer with heater (Labquest) |
| 8 | Tubular Furnace (RT - 1100 oC) | Vortex Mixer (Remi: Cyclomixer CM-101 Plus) |
| 9 | pH meter (HANNA) | Autoclave (Equitron- 7407-PAD) |
| 10 | Hydrothermal reactors (25 ml to 250 ml) | Micro Centrifuge ( Bioera- Max rpm- 5000) |
| 11 | Orbital Shaking Incubator (Remi: CIS-18) Temp:3 °C to 70°C Shaking Speed up to 500 rpm | Voltage Stabiliser for Orbital Shaker (Remi: VS-02) |
| 12 | Biosafety Cabinet (INSTR: Class-II Type A2) | -80ᵒC Upright Deep Freezer ( TDE30086FV-ULTS) |
| 13 | Inspection Snake Camera with LED | CO2 incubator (Thermo Scientific: BB150) |
| 14 | Lateral Flow Assay System (BioArtha) Antibody Printer, Dispense rate: 0.4-5µl/cm LFA Cutter: 100strips/Min Packaging machine |
Microbalance (Mettler Telodo : ME1002, 1200 g to10 mg readability) |
| 15 | Spray Pyrolysis Setup | Vacuum Pumps (INSTR: R400) |
| 16 | Swirltop Ultra Flat Magnetic Stirrer | Auto Secador Desiccator cabinet (SP Scienceware) |
| 17 | Overhead Stirrer (Remi: RQT-127AD) | Digital Ultrasonic Cleaner (Remi RQT: LMVC-6) |
| 18 | Refrigerator (Whirlpool) | Wavex – Classic Rotating Mixer (ABD-E11305) |
| Facilities for Material Testing and Application | ||
| 1 | Dynamic Light Scattering (Litesizer500: BM10) Particle size: ~0.3 nm to 10 µm, Zeta potential: −500 mV to +500 mV with 658 nm laser diode | UV-VIS Spectrophotometer (JASCO: V750) for liquid and solid samples, Wavelength Range: 190–900 nm. |
| 2 | Multichannel Potentiostat (AutoLab: M204) 2-channels (with FRA module) ±10 V, Frequency range - 10 µHz to 1 MHz. | Biopotential Galvanostat (DropSens) ±4 V, Frequency range - 10 µHz to 1 MHz. |
| 3 | Keithley Electrometer 6517B/ High Resistance Meter | Keithley Digital Multimeter (DMM-6500) |
| 4 | Electrophoresis Setup (ABD: E12100) | 10MHz Arbitrary Waveform Generator (Keysight) |
| 5 | Gas/ Humidity / Light sensor measurement system with 4 probe setup (Stage Heater: RT – 600 oC) | Digital Storage Oscilloscope (Keysight: DSOX-2011A) |
| 6 | Microscope (Olympus: CX23 binocular ) | Inverted Fluorescence Microscope (Olympus: CKX83) |
| 7 | LED & Detector (MELS) | Microplate Absorbance Reader (Biorad: iMark) |
| 8 | Dip Coater (Holmarc HO-TH02B) | 3D Printer setup (Creality- CR-10 SmartPro) |
| 9 | Ocean Optics – Miniature Spectrometer (Range: 200>) | Ocean Optics – Halogen Light Source (HL–2000–FHSA) |
| 10 | Ultra-Violet (UV) Inspection Cabinet (BTI) | DC Power Supply – Wanptek (0–30 V / 0 – 10 A) |